|
Pressure forming is a variation of vacuum forming that utilizes both vacuum
and compressed air to force the plastic sheet against the mold. As the
platens are closed, the vacuum pulls on one side of the sheet and compressed
air pushes on the other. Specially shaped tooling is used to match the top
and bottom halves of the mold creating a seal to maintain pressures of up to
500 psi, therefore, the platens must be locked together. This compressed
air pressure reduces the cycle time and makes it possible to run at lower
temperatures, it also improves the distribution of the material creating a
more even wall thickness and enhances the detail of the part to a
nearly-injection-molded quality. After the part has been formed, the
platens unlock and one of the platens moves out of the way to speed up the
cooling process.
The increased air pressure will require a stronger mold and a locking
device for the platens so consequently a higher tooling expense will be
incurred.
Steps
- Material is heated to proper temp then moves over the mold.
- Platens close and lock.
- Vacuum and air pressure are applied.
Materials
Theoretically, any thermoplastic material can be pressure formed.
However, some materials are more difficult to work with than others.
Polyethylene, for instance, flows easily and causes few problems for
pressure formers. With vacuum alone, polyethylene can be intricately
formed. On the other hand, polycarbonate, which chills quickly, can
cause manufacturers to be concerned about tool design and plug assists.
Medical device manufacturers usually specify that their products
should be formed of a material that passes the Underwriters Laboratories
(UL) 94 V0 or 94 5V tests for flammability. The resins most commonly
used in pressure-formed medical products are flame- retardant grades of
acrylonitrile butadiene styrene (ABS).
In many cases, assists are used to help distribute material evenly
and to coin it into sharp or narrow corners. Depending on its
complexity, the design of a product's tooling may require the former to
use matched heated molds and assists; otherwise, assists can be made of
low-heat-transferring materials such as wood.
Advantages
- Sharp, crisp lines and details
- Low tooling costs
- Short lead time
- Textured surfaces and molded in colors
- Formed in undercuts
- Ideal for short runs
- Zero degree draft on sidewalls
- Embossed and Debossed areas
- Highly detailed openings
- Superior, uniform tolerance control
Applications
Use pressure forming when the part will be the "face" of the product
expecting a long life. You can pressure form a company logo or model
designation with styling lines, surface texture or other features in a
light weight and durable part. Use pressure forming when you have
undercuts or rims and a greater depth of draw.
|
Molding
- The guide to polymer processing technology,
materials, additives & equipment -
Life insurance